casvision.blogg.se

Choose English first, Click User name login→ Input your username and password →click login. Open IE browser on your computer or Laptop, go to “(If you don’t have IE browser, please download it first) You can view camera on computer or Laptop by IE in locate or remotely. *Check Original Page: Viewing Wireless Camera System on Computer by IE

Put the cover back to position and install the screws. Then, click format and format HDD,Final,power off the system. Turn on the NVR and check if it detects the hard drive.System setup->General setup->HDD setup, Push forward the cover to the end and remove it. Loose the two screws which are fixing the box cover. Note: Before installing the hard drive disk, please power off the system if it is on. The capacity should be less than or equal to recorder’s maximum capacity.

The type should be SATA. SATA2(3GB/s) or SATA3（6GB/s）is recommened. If you connect a USB stick or drive to USB port of DVR, DVR can back up video from internal hard disk drive to USB stick, but can’t record to USB stick directly.ĥ. The disk had better be the one used for survilliance, not for computer use.Ģ. There are several requirements of hard disk drive (HDD)ġ. *Check Original Page: How to install a hard disk drive on NVR?

Match code the camera, you need to put the camera next to the NVRġ) Please attached a camera to the NVR (use a net cable) and the camera needs to be connected to the power supplyģ) “Refreshed” to allow the NVR to find the attached camera (The camera’s IP on the above box must be .x)Ĥ) Found a blank line in the lower sectionĦ) Wait for about 30s and the camera connect success (camera’s IP 172.20.14.x) Install antennas for cameras and take it close to the NVR Then plug the camera to power adapter and use a network cable to connect the camera to NVR’s LAN port.īefore match code please delete the corresponding channel to spare a channel out for a new camera, then you can match and add new camera into the channel. Please refer to below picture to connect the camera to the NVR. If your camera has a network port, please follow the steps below to match code the camera. *Check Original Page: How to Match Code the Wireless Camera that have network port to NVR?